MEDSI2020 - List of Authors (Arab, N.B.)

Paper	Title	Page
WEPA08	Investigating of EBW Process Weldment Connections Stresses in ILSF 100 MHz Cavity by Simufact. Welding Software	239
	V. Moradi ILSF, Tehran, Iran A. Adamian, N.B. Arab PPRC, Tehran, Iran
	The cavity is one of the main components of all accelerators, which is used to increase the energy level of charged particles (electrons, protons, etc.). The cavities increase the energy level of the charged particle by providing a suitable electric field to accelerate the charged particle. Here, information about electron beam welding analysis in 100 MHz cavities of ILSF design will be explained. According to studies performed in most accelerators in the world, connections in cavities are made by various methods such as explosive welding, brazing, electron beam welding, etc. Many articles on large cavities state that the connection of the side doors must be done by the electron beam welding process. However, in the present paper, the three-dimensional model of the cavity is imported into Simufact. Welding software after simplification and mesh process was done, and then the heat source of electron beam welding and other welding factors such as beam power, Gaussian distribution, etc. are applied in the software. The purpose of this study is the number of residual stresses during the EBW process in the 100 MHz cavity of ILSF.
	Poster WEPA08 [2.344 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2020-WEPA08
About •	paper received ※ 21 July 2021 paper accepted ※ 19 October 2021 issue date ※ 02 November 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Investigating of EBW Process Weldment Connections Stresses in ILSF 100 MHz Cavity by Simufact. Welding Software

239

V. Moradi
ILSF, Tehran, Iran
A. Adamian, N.B. Arab
PPRC, Tehran, Iran

The cavity is one of the main components of all accelerators, which is used to increase the energy level of charged particles (electrons, protons, etc.). The cavities increase the energy level of the charged particle by providing a suitable electric field to accelerate the charged particle. Here, information about electron beam welding analysis in 100 MHz cavities of ILSF design will be explained. According to studies performed in most accelerators in the world, connections in cavities are made by various methods such as explosive welding, brazing, electron beam welding, etc. Many articles on large cavities state that the connection of the side doors must be done by the electron beam welding process. However, in the present paper, the three-dimensional model of the cavity is imported into Simufact. Welding software after simplification and mesh process was done, and then the heat source of electron beam welding and other welding factors such as beam power, Gaussian distribution, etc. are applied in the software. The purpose of this study is the number of residual stresses during the EBW process in the 100 MHz cavity of ILSF.

Poster WEPA08 [2.344 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2020-WEPA08

About •

paper received ※ 21 July 2021 paper accepted ※ 19 October 2021 issue date ※ 02 November 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)